Hi,

I have to monitor NTA at our Juniper devices.We have S-series  and  J-series router.Inorder to do that do we have to enable jflow and sflow.If yes then for jflow i have got the following command from junipers jflow document

set services flow-monitoring version9 template ipv4-test ipv4-template
set forwarding-options sampling input rate 1
set forwarding-options sampling input run-length 0
set forwarding-options sampling family inet output flow-server 172.19.101.85 port
2222
set forwarding-options sampling family inet output flow-server 172.19.101.85
version9 template ipv4-test
set forwarding-options sampling family inet output inline-jflow source-address
172.19.101.132
set interfaces ge-0/0/14 unit 0 family inet sampling input
set interfaces ge-0/0/14 unit 0 family inet address 23.23.23.1/24

What shall we use as the port number,sampling input rate,sampling input run-length..I want to monitor traffic from all the interfaces.

I have multiple remote sites connected over VPNS (via WAN links) to my main site. My NPM\NTA server sits in the main site.

Can NTA give me some numbers on the amount of broadcast traffic on a remote site?

Thanks

Greetings. I assume the answer to this is 'no', but I wanted to be sure. I discovered that several of our interfaces had the transmitted and received bandwidth set incorrectly. I've corrected them, but is there any way to get the historical usage data to recalculate using the correct numbers?

Thanks

I have Huawei AR2200V Router in branch office configured to sent NetStream traffic to NTA server.

NetStream configuration:

ip netstream timeout active 1

ip netstream timeout inactive 10

ip netstream tcp-flag enable

ip netstream export source LAN-address

ip netstream export host NTA-address 9996

I'm monitoring these interfaces in NMP:

I see great difference on WAN-interface GE0/0/0 between values shown by NPM via SNMP and NTA via NetStream.

NPM:

NTA:

So I can't count per-application bandwith on this interface. NTA shows only a small portion of real traffic goint through this interface.

How can I collect real traffic statistics in NTA?

After upgrading Orion Core NetFlow Interface details applets doesn't show any graphs.

But in simple interface details view it is working:

How can I fix it?

hi all,

does the NTA capable of monitoring the bandwidth from site to site?

thanks

Dear Sir,

I am facing some problem regarding Solarwinds NTA.I have  Juniper SRX210version 11.2 device and I have configured jflow there according to the following juniper’s linkhttp://kb.juniper.net/InfoCenter/index?page=content&id=KB16677.When I try to monitor the network traffic  I am getting the following alert“Netflow Receiver service  is receiving a Netflow data stream from an unmanaged device (xxx-ipaddress).The Netflow data stream from xxx-ipaddress will be discarded”. The node is already managed but I am not understanding why is it showing this message.

I am getting the same message for Juniper SRX100.

Please suggest us what shall be done

1. NTA shows 3 times the amount of traffic from our proxy server than the proxy server reports that it sent.

2. NTA reports ~2-5 times the amount of traffic other vendor collectors report.  The other vendors products agree with each other so what's going on?

This is in version 3.10 but it seems to have always been like this.

What does Interface 'NTA Virtual Interface 65535' has state: Unknown mean/refer to?

Is this something I should be concerned about and if so how would I remedy this error?

Thanks,

Todd

Hi,

My fortigate 110C has version 5.0 build 147

NTA version 3.11

I configured to push flows from WAN interface of firewall to Solarwind, but in NTA it show up "never receive flow"

I install wireshark to monitor the NIC in Server and I can see the flows from Fortigate. Other netflow sources are OK.

I do a search, some said that the problem is in the OS ver 4.0, but mine is 5.0.

What wrong with me? Please give me some advices

Thanks a lot!!!

I am new to NTA so I am sure this is a stupid question...

I am trying to identify all of the traffic flowing to a specific destination IP.  I have enabled all of the applications and service ports in NTA; however, I am still seeing a bunch of "Multi-Port Unmonitored Traffic", what is the cause of this and is there a way to figure out what it is?

Thanks in advance for any responses!

We have a couple of applications that we want to prioritize over other traffic. We also have limited bandwidth at our end locations and have noticed that when someone downloads their entire exchange mailbox it takes up a lot of bandwidth slowing everything down so we want to limit that. I would like to setup cbqos to monitor that the critical traffic is being shaped correctly but I get no cbqos feeds. I am sure its something I have configured incorrectly. When I look in solar winds I get netflow fine from this device but says last received cbqos is never. When I run a sh policy-map int multi1 I see that it is catching packets so I think qos is working. Any help you can give is appreciated.

Here are the relevant sections of the config. 

access-list 101 permit tcp any host 192.168.0.231

access-list 101 permit tcp any host 192.168.0.238

access-list 102 permit tcp any host 192.168.0.112

access-list 102 permit tcp any host 192.168.0.204

class-map match-all EXCHANGE

match access-group 101

class-map match-all CRITICAL_APPS

match access-group 102

policy-map QOS_POLICY

class CRITICAL_APPS

  set dscp af23

class EXCHANGE

  set dscp af11

  shape peak 500000

interface Multilink1

description Bonded MPLS 3.0mb

ip address x.x.x.x 255.255.255.252

ip flow ingress

ip flow egress

ppp multilink

ppp multilink group 1

service-policy output QOS_POLICY

snmp-server ifindex persist

snmp-server enable traps entity-sensor threshold

snmp mib persist cbqos

Solarwinds

sort this out please... it was highlighted as a flaw on thwack by someone
else in 2011, but you STILL cannot stop the stupid flow navigator appearing,
thus enabling all the views you have disabled at an account level.

this is a ridiculous situation and you need to fix it...

i have logged a call about the fact that the account limitation on the flow
navigator is broken, so please use this as a step to fix the whole problem!

cheers

dan

I am looking for clarification on NetFlow Interface Details, specifically the 2 percent utilization numbers.

First part of the question:

Looking at the Top 100 Endpoints, the one listed host transferred 19.12% of the data during the given time period.  This is the top number

Further, the one listed host utilized 2.97% of the available bandwidth during that given time period.  This is the bottom number in parenthesis.

Am I understanding this correctly?

Second part of the question:

I am not understanding the 2.97%.

If you add up ingress and egress, the sum is 317.2 Gbytes. If I am understanding correctly, this percentage is calculated based upon

the interface bandwidth; this is configured as 1.0 Gbps for both Receive and Transmit.  See below.

Shouldn't the utilization be 31.7% instead of 2.97%?

Hi Guys,

I'm confused regarding the Netfow support by Cisco 3750 series switchs, all official documents either from Cisco or Solarwinds reports that Netflow is not supported by Cisco 3700 series and some where 3700 support V9 instead of 5 and 6 generally used!!! but on the demo I can see one 3725 integrated on NTA.

Could some one confirm that 3700 support Netflow and can be integrated into NTA, if so, is there any IOS limitation?

Also I will appreciate if I Solarwinds guys can share the configuration used for this node http://oriondemo.solarwinds.com/Orion/TrafficAnalysis/NetflowNodeDetails.aspx?NetObject=NN:208 witch is already integrated into NTA.

Thanks and Regards.

Salah

i am quite new to solarwinds and would appreciate help on the following:

How can i have a daily report of:

1. Summary Bandwidth consumption List by IP(Top 100)
2. Service Down/Up during previous day
3. What are the services not up

Also, can DNS mapping be done on solarwinds ?

Hello,

NTA 4.0 RC is available for all customers that are covered under maintenance.

This is a whopper of a release for NetFlow Traffic Analyzer. NTA 4.0 brings one minute granularity for all data! NTA no longer aggregates data over time. This is a big change for us and a big change for you! With this change comes some critical information that you need to take into account.

First, we are no longer storing flow data in SQL, we have developed our own Flow Storage Database that will now be responsible for the processing and storage of flow data. Secondly we have introduced web based reporting for NTA.

Requirements for NTA 4.0:

• 64bit Environment is required, if you have more than one poller, make sure they are all on 64bit OS’s.
  • You will be able to install a 32bit version of NTA however it will not use the new Flow Storage Database
• NPM 10.6 is required, NPM 10.6 has the new web based reporting engine which is required for NTA 4.0
• NTA Flow Storage Database install is required and should be done before upgrading / installing NTA on the pollers.
• Connection to Orion database is required, CBQoS data and some additional low level information is still stored in this DB.

"Where do I install the Flow Storage Database?

     The Flow Storage Database can be installed on a poller (Main or additional), it can also be installed on a remote machine or VM with in your environment. The Flow Storage Server must be installed first before upgrading or installing NTA 4.0 on your pollers. Given the overhead on CPU and Memory that capturing and processing flow data requires we are strongly recommending that you install the Flow Storage DB on a separate VM or physical machine with in your network. Local poller installations are supported but will not see same type of performance increases that are capable by running the Flow Storage Database on a dedicated machine.

FAQ about the Flow Storage Database:

Where should I install my Flow Storage Database?

• We strongly recommend a dedicated machine for the NTA Flow Storage Database, Orion/NPM performance will be improved and NTA performance will be significantly improved

Can I install the Flow Storage Database on a local poller (Main or additional)

• Yes you can install this DB on a local poller, when doing so we recommend installation on a separate partition/dedicated disk. We also recommend that this machine be on the higher end of specs. 8 cores @3GHz, 16-32gb of ram and a fast disk.

Can I install the Flow Storage Database on the Orion/NPM server that is hosting the SQL DB?

• Yes you can install the FSDB on this box, this is not recommended. If your only option is to run on this machine please ensure that the NTA FSDB is installed on a separate partition with a dedicated disk for storage. Highest end machine required for this deployment 16+ cores @3GHz, 64-128GB of ram. If you have a low number of PDU’s per second (<1k) you will not need to have a high end machine

Do I need SQL installed on the machine that the Flow Storage Database will be installed on?

• No, NTA's Flow Storage Database is not a SQL DB.

What does my physical or VM server that I will install the NTA FSDB on need to have installed?

• A 64bit Windows OS (2008R2-2012)
• .NET framework 3.5sp1 and 4.0 (Included in the installer if you have not previously installed them)

Do I need to open specific ports on the Flow Storage Database server?

• Yes, it is necessary to open tcp 1433 between the new data storage and the existing SQL server, as well as tcp 17777 between each of the pollers to the new storage server.

Do I need a connection to the Orion/NPM database?

• Yes, if you are installing Flow Storage DB to dedicated machine, during the configuration wizard you will be required to enter the hostname/IP and credentials of the Orion/NPM Database, NTA requires this connection for CBQoS and other information provided by NPM

How do I determine the right amount of CPU/MEM for my Flow Storage Database?

• Type following line into command line on all of your pollers (during business hours to capture the higher load):
  typeperf "\SolarWinds NetFlow Averages\PDUs Processed per second" -sc 1
  If the total count from all pollers is less than 5k, we recommend that you have a minimum of 4 cores @3ghz for processing and 8-16GB of Ram. If that number is bigger than 5k we recommend 8 cores @3gzh for processing and 16-32GB of Ram

How do I determine the right amount of Storage for my Flow Storage Database?

• Reference the Average PDU’s processed per second number. If you are near 2k we recommend a minimum of 200GB of local NTFS storage for a 30 day (default) retention period. Please also take into account how much data you will be migrating from your previous SQL flow storage, you will be informed on how much space is required for the migration (if you choose to) during the configuration wizard. You can also gauge this number by running this query on your Orion SQL DB (Insert Query Here). If your average PDU’s per second processed per second are between 4k and 5k we are recommending a minimum of 0.5-1.5 Terabyte of local NTFS storage. If you are near 10k we will recommend 2-4 terabytes of local NTFS storage. If you are running a huge environment that is capturing well above 10k as in 20-45k per second you will need 4-8 terabytes of storage

Why is so much storage required?

• With one minute granularity for the entirety of the retention period the storage requirements for NTA have increased 8-10x for the same retention period when compared to previous SQL storage of flow data. However, data from SQL server will be migrated so you will get some extra free space on your SQL server.

Can I change the default retention period?

• Yes, NTA 4.0 will default the retention period to 30 days, you can change that number at any time on NTA settings page, and we have found that most customers only need 2 weeks of historical data. There are also some customers who are interested in 6months to a year for their data retention. In the future we will be providing more options to our users on how to manage the retention period as well as the database growth.

What can I do if my Flow Storage has reached capacity?

• NTA will alert you if your Flow Storage Database nears or reaches capacity, in this case we recommend that you adjust your retention period to a shorter period. If you reached capacity on day 27 of your retention period, adjust your retention period accordingly and the data will be trimmed from your DB automatically the next time the midnight maintenance runs.

Does NTA’s Flow Storage Database work with Solarwinds EoC

• There is no change in behavior for NTA in regards to EoC.

My DBA wants to know more about this Flow Storage Database, how does it work?

• The NTA Flow Storage Database is a columnar oriented database that leverages a very fast bitmap indexing technology. Data is stored in partitions that are created per few sources per day or per max size. New partitions are created daily or as necessary.

How do I access this data? I used to write SQL Queries to data mine the flow data in SQL

• Now that the flow data is being stored in our own database you can directly query the raw flow data by using the SolarWinds API which leverages our own query language, aptly titled SolarWindsQueryLanguage (SWQL)

I had written some custom reports using SQL, will those still work?

• Old custom reports have been archived for you to reference, you will need to rebuild those reports using the new web reporting interface that ships with 4.0. If you are unable to write a similar report with the new web reporting, you can always use the SolarWinds API/SWQL

How does archive and restore work with new Flow Storage Database

• Archive and restore of SQL DB has not changed, to backup and restore flow data you have to use backup and restore functions of Flow Storage DB.

FAQ on Migrating Data from SQL to the new Flow Storage Database:

CanI migrate my historical Data from the SQL Flow Storage?

• Yes during the configuration wizard you can choose to migrate the historical data from SQL, this will run in parallel with new flow storage until the migration has completed.

Will my historical data from SQL be cleaned up / deleted

• Yes, as the data is migrated to the new Flow Storage Database it is deleted from the SQL database

Do I have to migrate my data from SQL to the new Flow Storage Database?

• No, you have two additional options surrounding migration. You can choose to not migrate and leave the data in the SQL DB (however this data will not be accessible from NTA after upgrade, but you can still access them directly in SQL or using dedicated evaluation NPM+NTA installation), or you can choose to not migrate and clean the data out of the SQL DB.

Can I capture new flows while migration is happening?

• Yes, the migration will run in the background until complete. The application will automatically load balance the two operations (recording flows / migrating)

FAQ on Installing a Release Candidate - RC - version of NTA 4.0

Does the RC need to be applied to the database server as well as Orion and Polling engines?

• Whether you apply an NTA 4.0 RC to NTA 3.x or to a previous NTA 4.0 RC (e.g. RC2 over RC1), the RC needs to be applied to your entire NTA environment, i.e. main poller, flow storage (only for the case of RC2 applied over RC1 ), all additional pollers and all additional websites.

I am experiencing a failure of NTA Flow Storage Configurator, what happens?

• It is a known issue of RC2, which wil be adressed in a further release. For now, Cancel it, and start the NetFlowStorageServer service manually. It just takes longer for the service to start.

Hi,

My fortigate 110C has version 5.0 build 147

NTA version 3.11

I configured to push flows from WAN interface of firewall to Solarwind, but in NTA it show up "never receive flow"

I install wireshark to monitor the NIC in Server and I can see the flows from Fortigate. Other netflow sources are OK.

I do a search, some said that the problem is in the OS ver 4.0, but mine is 5.0.

What wrong with me? Please give me some advices

Thanks a lot!!!

Dear, In NAT  to monitor  this type flow??/

Cflowd for Alcatel-Lucent

Rflow for Ericsson

AppFlow Citrix

We have this 6509 in a high school and it stopped sending netflow since Oct. 14. Hopefully some one can help me to troubleshoot it to see why.

I have captured the following pieces to go through the netflow settings on this switch. Let me know if I need to provide additional information.

When I telnet to 10.x.254.1 and did "show ip flow export"

Flow export is enabled

  Exporting flows to 10.1.1.248 (2055)

  Exporting using source interface Vlan254

  Version 5 flow records

  24422797 flows exported in 987830 udp datagrams

  0 flows failed due to lack of export packet

  0 export packets were sent up to process level

  0 export packets were dropped due to no fib

  0 export packets were dropped due to adjacency issues

  0 export packets were dropped due to fragmentation failures

  0 export packets were dropped due to encapsulation fixup failures

  0 export packets were dropped enqueuing for the RP

  0 export packets were dropped due to IPC rate limiting

"show ver"...

Cisco Internetwork Operating System Software

IOS (tm) MSFC2 Software (C6MSFC2-DSV-M), Version 12.1(26)E9, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2007 by cisco Systems, Inc.

Compiled Sat 11-Aug-07 07:37 by hqluong

Image text-base: 0x40008F90, data-base: 0x41AC0000

ROM: System Bootstrap, Version 12.1(4r)E, RELEASE SOFTWARE (fc1)

BOOTLDR: MSFC2 Software (C6MSFC2-DSV-M), Version 12.1(26)E9, RELEASE SOFTWARE (fc1)

CLHS-B2R102M-6509MSFC uptime is 16 weeks, 5 days, 23 hours, 4 minutes

System returned to ROM by power-on

System restarted at 14:55:25 edt Fri Jul 19 2013

System image file is "bootflash:c6msfc2-dsv-mz.121-26.E9.bin"

cisco MSFC2 (R7000) processor with 114688K/16384K bytes of memory.

Processor board ID SAD052902NE

R7000 CPU at 300Mhz, Implementation 39, Rev 2.1, 256KB L2, 1024KB L3 Cache

Last reset from power-on

Bridging software.

X.25 software, Version 3.0.0.

31 Virtual Ethernet/IEEE 802.3  interface(s)

509K bytes of non-volatile configuration memory.

16384K bytes of Flash internal SIMM (Sector size 512K).

Configuration register is 0x102

"show boot"...

BOOT variable = bootflash:c6msfc2-dsv-mz.121-26.E9.bin,1
CONFIG_FILE variable =
BOOTLDR variable =
Configuration register is 0x102

-------------------------------------------------------------------------------------------------------------------------------------------

When I telnet to 10.x.254.5 and did "show mls nde"...

Netflow Data Export version: 7  (**this is the only version available to choose from)

Netflow Data Export enabled

Netflow Data Export configured for port 2055 on host 10.1.1.248

Destination port filter is 2055

Filter type: include

Total packets exported = 7152

"Show ver"...

WS-C6509 Software, Version NmpSW: 6.4(21)

Copyright (c) 1995-2006 by Cisco Systems

NMP S/W compiled on Feb 16 2006, 16:53:21

System Bootstrap Version: 5.3(1)

System Web Interface Version: Engine Version: 5.3.4 ADP Device: Cat6000 ADP Version: 1.9 ADK: 40

Hardware Version: 2.0  Model: WS-C6509  Serial #: SCA0504021Q

PS1  Module: WS-CAC-1300W    Serial #: SON04503284

PS2  Module: WS-CAC-1300W    Serial #: SON04512899

Mod Port Model               Serial #    Versions

--- ---- ------------------- ----------- --------------------------------------

1   2    WS-X6K-SUP1A-2GE    SAD052904DE Hw : 7.0

                                         Fw : 5.3(1)

                                         Fw1: 5.4(2)

                                         Sw : 6.4(21)

                                         Sw1: 6.4(21)

         WS-F6K-PFC          SAD052803N1 Hw : 1.1

3   16   WS-X6416-GBIC       SAL06468LUC Hw : 2.5

                                         Fw : 5.4(2)

                                         Sw : 6.4(21)

4   48   WS-X6348-RJ-45      SAL0501147V Hw : 1.9

                                         Fw : 5.4(2)

                                         Sw : 6.4(21)

5   48   WS-X6348-RJ-45      SAL05084HYG Hw : 2.0

                                         Fw : 5.4(2)

                                         Sw : 6.4(21)

6   48   WS-X6348-RJ-45      SAL0539C5GM Hw : 5.0

                                         Fw : 5.4(2)

                                         Sw : 6.4(21)

15  1    WS-F6K-MSFC2        SAD052902NE Hw : 1.2

                                         Fw : 12.1(26)E9

                                         Sw : 12.1(26)E9

       DRAM                    FLASH                   NVRAM

Module Total   Used    Free    Total   Used    Free    Total Used  Free

------ ------- ------- ------- ------- ------- ------- ----- ----- -----

1       65408K  53566K  11842K  16384K  15481K    903K  512K  329K  183K

"show boot"...

BOOT variable = bootflash:cat6000-supcv.6-4-21.bin,1;
CONFIG_FILE variable = slot0:switch.cfg

Configuration register is 0x2102
ignore-config: disabled
auto-config: non-recurring, overwrite, sync disabled
ROMMON console baud: 9600
boot: image specified by the boot system commands

Trying to find out why it stopped exporting, and I am having difficult time to understand from iOS and CatOS on the same core switch.

According to "show ip flow export" from 10.x.254.1, the source is vlan254 and port 4/2 is set for vlan254

CLHS-B2R102M-6509CA> (enable) show port 4/2
Port  Name                 Status     Vlan       Duplex Speed Type
----- -------------------- ---------- ---------- ------ ----- ------------
4/2  -BHN MetroEthernet - connected  254          full   100 10/100BaseTX

Port  AuxiliaryVlan AuxVlan-Status     InlinePowered     PowerAllocated
                                   Admin Oper   Detected mWatt mA @42V
----- ------------- -------------- ----- ------ -------- ----- --------
4/2  none          none           -     -      -        -     -

Port  Security Violation Shutdown-Time Age-Time Max-Addr Trap     IfIndex
----- -------- --------- ------------- -------- -------- -------- -------
4/2  disabled  shutdown             0        0        1 disabled      25

Port  Num-Addr Secure-Src-Addr   Age-Left Last-Src-Addr     Shutdown/Time-Left
----- -------- ----------------- -------- ----------------- ------------------
4/2         0                 -        -                 -        -         -

Port     Broadcast-Limit Multicast Unicast Total-Drop
-------- --------------- --------- ------- --------------------
4/2                   -         -       -                    0

Port  Send FlowControl  Receive FlowControl   RxPause    TxPause
      admin    oper     admin     oper
----- -------- -------- --------- ---------   ---------- ----------
4/2  off      off      off       off         0          0         

Port  Status     Channel              Admin Ch
                 Mode                 Group Id
----- ---------- -------------------- ----- -----
4/2  connected  off                     74     0

Port  Align-Err  FCS-Err    Xmit-Err   Rcv-Err    UnderSize
----- ---------- ---------- ---------- ---------- ---------
4/2           0          0          0          0         0

Port  Single-Col Multi-Coll Late-Coll  Excess-Col Carri-Sen Runts     Giants
----- ---------- ---------- ---------- ---------- --------- --------- ---------
4/2           0          0          0          0         0         0         0

Port  Last-Time-Cleared
----- --------------------------
4/2  Fri Jul 19 2013, 14:54:44

When doing "show cdp nei 4/2"....which is up-linked with neighbor school.

Port     Device-ID                       Port-ID                   Platform
-------- ------------------------------- ------------------------- ------------
4/2     CK8S-B4R104A-3825.cisco.osceola GigabitEthernet0/1        Cisco 3825

checking on running-config for module 4...

CLHS-B2R102M-6509CA> (enable) show running-config 4

This command shows non-default configurations only.

Use 'show config <mod> all' to show both default and non-default configurations.

....................

begin

!

# ***** NON-DEFAULT CONFIGURATION *****

!

!

#time: Thu Nov 14 2013, 13:54:30 EST

!

# default port status is enable

!

!

#module 4 : 48-port 10/100BaseTX Ethernet

set vlan 5    4/41-48

set vlan 20   4/3-12,4/14-29

set vlan 172  4/1

set vlan 245  4/39

set vlan 252  4/38,4/40

set vlan 253  4/13,4/30-37

set vlan 254  4/2

set port speed      4/1-2,4/13,4/37-48  100

set port duplex     4/1-2,4/13,4/37-48  full

set port name       4/1  -B2R102M-3825-

set port name       4/2  -BHN MetroEthernet -  (**this is the connection to CK8S with ISP)

set port name       4/30 -AVSafari IP:50-

set port name       4/31 -AVMedia-

set port name       4/32 -AVMedia-

set port name       4/33 -AVMedia-

set port name       4/34 -AVMedia-

set port name       4/35 -AVMedia-

set port name       4/36 -AVMedia-

set port name       4/37 -AVLantronx IP:5-

set port name       4/38 -FacilHVAC IP:53-

set port name       4/39 -UPS IP:20-

set port name       4/40 - APC-Cooler -

set port name       4/41 -APPS HB IP:-

set port name       4/42 -VMHOST1 HB IP:-

set port name       4/43 -VMHOST2 HB IP:-

set port name       4/44 -FS HB IP:-

set port name       4/45 -APPS iLO IP:-

set port name       4/46 -VMHOST1 iLO IP:121-

set port name       4/47 -VMHOST2 iLO IP:122-

set port name       4/48 -FS iLO IP:115-

set trunk 4/1  off negotiate 1-1005,1025-4094

set trunk 4/2  off negotiate 1-1005,1025-4094

set trunk 4/3  off negotiate 1-1005,1025-4094

set trunk 4/4  off negotiate 1-1005,1025-4094

set trunk 4/5  off negotiate 1-1005,1025-4094

set trunk 4/6  off negotiate 1-1005,1025-4094

set trunk 4/7  off negotiate 1-1005,1025-4094

set trunk 4/8  off negotiate 1-1005,1025-4094

set trunk 4/9  off negotiate 1-1005,1025-4094

set trunk 4/10 off negotiate 1-1005,1025-4094

set trunk 4/11 off negotiate 1-1005,1025-4094

set trunk 4/12 off negotiate 1-1005,1025-4094

set trunk 4/13 off negotiate 1-1005,1025-4094

set trunk 4/14 off negotiate 1-1005,1025-4094

set trunk 4/15 off negotiate 1-1005,1025-4094

set trunk 4/16 off negotiate 1-1005,1025-4094

set trunk 4/17 off negotiate 1-1005,1025-4094

set trunk 4/18 off negotiate 1-1005,1025-4094

set trunk 4/19 off negotiate 1-1005,1025-4094

set trunk 4/20 off negotiate 1-1005,1025-4094

set trunk 4/21 off negotiate 1-1005,1025-4094

set trunk 4/22 off negotiate 1-1005,1025-4094

set trunk 4/23 off negotiate 1-1005,1025-4094

set trunk 4/24 off negotiate 1-1005,1025-4094

set trunk 4/25 off negotiate 1-1005,1025-4094

set trunk 4/26 off negotiate 1-1005,1025-4094

set trunk 4/27 off negotiate 1-1005,1025-4094

set trunk 4/28 off negotiate 1-1005,1025-4094

set trunk 4/29 off negotiate 1-1005,1025-4094

set trunk 4/30 off negotiate 1-1005,1025-4094

set trunk 4/31 off negotiate 1-1005,1025-4094

set trunk 4/32 off negotiate 1-1005,1025-4094

set trunk 4/33 off negotiate 1-1005,1025-4094

set trunk 4/34 off negotiate 1-1005,1025-4094

set trunk 4/35 off negotiate 1-1005,1025-4094

set trunk 4/36 off negotiate 1-1005,1025-4094

set trunk 4/37 off negotiate 1-1005,1025-4094

set trunk 4/38 off negotiate 1-1005,1025-4094

set trunk 4/39 off negotiate 1-1005,1025-4094

set trunk 4/40 off negotiate 1-1005,1025-4094

set trunk 4/41 off negotiate 1-1005,1025-4094

set trunk 4/42 off negotiate 1-1005,1025-4094

set trunk 4/43 off negotiate 1-1005,1025-4094

set trunk 4/44 off negotiate 1-1005,1025-4094

set trunk 4/45 off negotiate 1-1005,1025-4094

set trunk 4/46 off negotiate 1-1005,1025-4094

set trunk 4/47 off negotiate 1-1005,1025-4094

set trunk 4/48 off negotiate 1-1005,1025-4094

set spantree portfast    4/1,4/3-48 enable

set port qos 4/1-48 trust trust-cos

set qos acl map ACL_IP-TRUSTDSCP 4/1-48

set port channel 4/1-48 mode off

end

Hope some one can help me to spot where the problem is or guide me to what to look for.