Hello,
I'm struggling to get CBQoS to work on the virtual-template on our 887VA's on NTA. Was wondering if anyone else has had this issue.
I can get netflow from the VT, but the only way to get CBQoS is to apply the service-policy to the ATM interface. And if I apply flow and QoS to the ATM I only get QoS, not flow.
I can't get both from the same interface.
I've tried different IOS versions up to Version 15.4(3)M1
Here's the VT config:
interface Virtual-Template1
description xxxxxxx
bandwidth 1120
bandwidth receive 8128
ip unnumbered Loopback0
ip nbar protocol-discovery
ip flow ingress
ip flow egress
ppp chap hostname xxxxxxx@adslconnect.bt.com
ppp chap password 0 xxxxxxx
service-policy output Voice-VideoLLQ
Any help would be appreciated.
Craig
