Hello
I have a 4800G on my network in which ja I enabled sFlow on an interface specifies the config as shown below
sFlow Agent ip 192.168.0.254 <- My core switch
sFlow collector ip 192.168.1.4 <- My SolarWinds NetFlow
sFlow interval 60
interface GigabitEthernet2/0/7
description UTI_Visitantes
port link-type hybrid
port hybrid vlan 10 20 50 60 tagged
port hybrid vlan 1 untagged
speed 1000
full duplex
sFlow enable inbound
sFlow enable outbound
sFlow sampling-rate 100,000
When I click on the interface configured in the NetFlow I get the following message:
Details for interface 'GigabitEthernet2/0/7' on 'CSW.GTI.01.254' are not available because CBQoS and NetFlow data are not available.
Refer to device vendor's documentation to enable these features.
What is NetFlow? What is CBQoS?
Anyone have any idea where I am going wrong?
↧
NetFlow x 3Com 4800G
↧